Replacement Parts

Replacement wheels, lids, trunion bars, fork pockets, drain plugs, and hardware for front load, rear load, and roll-off containers. Parts are stocked to fit the major container brands and can be ordered one at a time or in quantity for fleet maintenance.

Wheels & Casters

Replacement wheels and casters for front load, rear load, and commercial dumpsters. Caster assemblies use sealed bearings, zinc-plated hardware, and polyolefin or rubber-on-steel wheels that hold up on rough pavement under concentrated loads. They come in swivel or rigid configurations with bolt-on or weld-on mounting plates and replace the casters on containers from all major manufacturers. For roll-offs and compactors we also stock cable sheave rollers, guide rollers, and ground-contact rollers with hardened steel pins and greaseable bushings. Casters come in 6-inch and 8-inch sizes, and rollers in multiple diameters.

6" Caster8" CasterCable Sheave RollerGuide Roller

View Details

Lids & Covers

Replacement lids and covers for front load and rear load containers, in gravity-pivot, spring-loaded, flat, and split-opening styles. Each lid is formed steel with internal channel reinforcement so it does not warp or oil-can, finished in the same two-coat paint system as a new container, and shipped with mounting hardware. Rubber bumpers, hinge pins, and spring assemblies are sold separately, so a worn lid can often be repaired in the field instead of replaced. The lids fit containers from all major manufacturers: send the container dimensions and we will match the right one. Lids for non-standard openings are made to order.

1-2 Yard Lid3-4 Yard Lid6-8 Yard LidCustom Lid

View Details

Trunion Bars

Replacement trunion bars, machined from solid steel bar stock to the 1-3/4 inch diameter that rear load truck lifters are built around. Each bar is lathe-turned to tight tolerances so it seats cleanly in standard rear-load lifting mechanisms without binding. Standard lengths cover 1 through 6 yard containers, and custom lengths are cut to order. Hot-dip galvanizing is available for coastal and high-humidity sites where bare steel rusts quickly. Weld-on mounting brackets with pre-drilled bolt holes are sold separately for replacing a damaged trunion assembly in the field.

1-2 Yard Length3-4 Yard Length6 Yard LengthCustom Length

View Details

Arm Bars & Fork Pockets

Fork pockets and arm bars on a front load container take thousands of lift cycles and repeated impact from automated truck arms, so they often wear out before the body does. Replacement fork pockets are heavy wall structural tube with reinforced gusset plates at the mounting points, built to original manufacturer specifications. Arm bars come in the standard spacing configurations for all major front-load truck systems, and fork pocket pairs come in standard and wide spacing. Parts ship pre-drilled or prepped for welding. Buy them individually for spot repairs or as a complete kit to refurbish a container.

Standard Fork Pocket PairWide Fork Pocket PairArm Bar SetComplete Refurbishment Kit

View Details

Drain Plugs & Hardware

Replacement drain plugs, cam-lock hardware, hinge pins, and other container hardware for fleet maintenance and field repair. Threaded drain plugs come with replacement O-rings for a positive seal. Cam-lock latch assemblies are heat-treated steel so they stay engaged under daily collection vibration. Hinge pins are machined from alloy steel with optional grease fittings. The hardware fits containers from all major manufacturers, and we can cross-reference part numbers to confirm the right component for your model. Order single pieces, assortment packs of common field-repair items, or fleet quantities.

Drain Plug KitCam-Lock AssemblyHinge Pin SetHardware Assortment Pack

View Details

Custom Sizes and Configurations

Floor length, steel gauge, doors, liners, paint, and hardware can be built to your spec. Send a drawing or describe the job and we will quote it.

Request a Quote