Containers

Roll-off, hook lift, front load, and rear load containers engineered for demanding commercial and industrial waste hauling applications.

Cable Roll-Off

Cable Roll-Off Container - Flat Front

Our flat front cable roll-off container is the industry workhorse for construction demolition, industrial scrap, and municipal solid waste applications. Fabricated from 7 to 10 gauge high-strength steel plate, the flat front design provides maximum cubic yardage within standard cable hoist dimensions. All seams are continuously MIG-welded inside and out for superior structural integrity and leak resistance. The floor is reinforced with heavy-duty channel runners spaced on 12-inch centers, distributing concentrated loads across the full length of the container. Standard cable sheave rollers are precision-machined and mounted on greaseable pins for smooth, reliable loading and unloading cycles.

10 Yard15 Yard20 Yard30 Yard+2 more

View Details

Cable Roll-Off

Cable Roll-Off Container - Tub Style

The tub style cable roll-off container features a seamless curved bottom radius that eliminates the sharp 90-degree floor-to-sidewall joint found in flat front designs. This radiused profile significantly reduces material hang-up during dumping, making it the preferred choice for wet waste, sludge, and sticky materials that tend to bridge in conventional containers. The curved lower section also distributes load stress more evenly across the shell, extending service life in demanding applications. Constructed from high-strength steel with full-penetration welds throughout, each tub is hydrostatically tested for integrity before leaving our facility.

10 Yard15 Yard20 Yard30 Yard+2 more

View Details

Cable Roll-Off

Cable Roll-Off Container - Heavy Duty

Engineered for the most punishing applications in construction demolition, scrap metal processing, and heavy industrial waste, our heavy duty cable roll-off container is built exclusively from 7 gauge steel plate on floors, sidewalls, and end panels. The reinforced structural frame incorporates double-channel floor runners and additional gusset plates at all high-stress junctions. An oversized top rail fabricated from 4-inch structural tubing resists racking and deformation under extreme loading conditions. Every heavy duty container is load-tested before shipment to verify performance under rated capacity. This is the container you specify when standard gauge simply will not survive the job site.

20 Yard30 Yard40 Yard50 Yard

View Details

Hook Lift

Hook Lift Container - Flat Front

Our flat front hook lift container is designed for hook lift truck systems that use a hydraulic arm to load and unload containers without the cable mechanism of traditional roll-off equipment. The integrated hook bar assembly is fabricated from heavy structural plate and positioned per manufacturer specifications for universal compatibility with major hook lift systems including Galbreath, Stellar, and SwapLoader. The flat front profile maximizes usable volume while maintaining a low center of gravity during transport. Floor construction features continuous longitudinal runners welded directly to a reinforced subframe, providing exceptional rigidity under load.

10 Yard15 Yard20 Yard25 Yard+1 more

View Details

Hook Lift

Hook Lift Container - Tub Style

The tub style hook lift container combines the clean-discharge advantages of a radiused bottom profile with the versatility of hook lift truck compatibility. The seamless curved lower section eliminates the floor-to-wall corner where material typically accumulates, ensuring complete evacuation of wet sludge, food waste, and other adhesive materials during the dump cycle. The hook bar is integrated into the structural frame and positioned for balanced loading on all major hook lift systems. Interior surfaces are smooth-finished to further reduce material adhesion and simplify washout between loads.

10 Yard15 Yard20 Yard25 Yard+1 more

View Details

Hook Lift

Hook Lift Container - Heavy Duty

Built for the most demanding hook lift applications, our heavy duty model features 7 gauge steel construction on all primary surfaces, a double-reinforced hook bar assembly, and an upgraded subframe designed to withstand the concentrated stresses of heavy scrap, demolition debris, and industrial byproducts. The reinforced top rail utilizes 4-inch structural channel to prevent sidewall deformation under asymmetric loading. All structural connections are full-penetration welded and backed with gusset plates at critical nodes. The heavy duty hook lift container is the specification of choice for customers who require maximum service life in extreme operating environments.

15 Yard20 Yard25 Yard30 Yard

View Details

Front Load

Front Load Container - Slant

The slant front load container is the most widely deployed commercial dumpster design in the waste industry. The angled front panel creates a natural taper that guides material toward the rear during the automated tip-and-dump cycle, reducing residual waste left in the container after each service. Constructed from 12 gauge formed steel panels with continuously welded seams, the slant design delivers reliable performance in restaurant, retail, office, and light commercial applications. Standard fork pockets are spaced to accept all major front-load truck arm configurations. Each container is finished with a two-coat polyurethane system for extended corrosion protection and a professional appearance that satisfies property managers and municipal requirements.

1 Yard1.5 Yard2 Yard3 Yard+3 more

View Details

Front Load

Front Load Container - High Side

Our high side front load container provides additional sidewall height above the standard slant body, increasing volumetric capacity for lightweight, bulky waste streams such as cardboard, plastics, and mixed recyclables. The extended sidewalls are braced with vertical hat-channel stiffeners pressed into the panels during fabrication, maintaining structural rigidity without adding significant weight. The high side design is especially popular with grocery chains, distribution centers, and manufacturing facilities that generate large volumes of low-density packaging waste. The taller profile helps contain wind-blown debris, supporting cleaner collection sites and reducing litter complaints.

1 Yard1.5 Yard2 Yard3 Yard+3 more

View Details

Front Load

Front Load Container - Flat Lid

The flat lid front load container is engineered for installations where a flush, low-profile appearance is required or where overhead obstructions limit the use of gravity-pivot lids. The rigid flat lid is fabricated from formed 14 gauge steel with internal channel reinforcement to prevent oil-canning and ponding. A continuous rubber seal along the lid perimeter reduces odor escape and keeps rainwater out of the waste stream, an important consideration for generators who are billed by weight. The flat lid design is commonly specified by municipalities, HOA communities, and restaurant districts where aesthetics and odor control are top priorities.

2 Yard3 Yard4 Yard6 Yard+1 more

View Details

Rear Load

Rear Load Container - High Side

Our high side rear load container is designed for automated and semi-automated rear-loading collection trucks. The extended sidewall height increases holding capacity for lightweight waste streams while maintaining compatibility with standard rear-load lifter mechanisms. The 1-3/4 inch diameter solid steel trunion bar is the heart of the lifting interface, precision-machined to exacting tolerances and continuously welded to reinforced mounting brackets that distribute lift loads across the full width of the container body. High side models are the preferred choice for multi-family residential routes, small commercial accounts, and municipal curbside collection programs that generate high volumes of bagged household waste.

1 Yard1.5 Yard2 Yard3 Yard+1 more

View Details

Rear Load

Rear Load Container - Low Profile

The low profile rear load container is specifically designed for locations where reduced height is a requirement, such as parking garages, covered loading docks, and enclosed trash rooms with limited overhead clearance. The shortened sidewall height allows the container to fit under structures where standard-height models cannot operate. Despite the reduced profile, the container retains the same robust 1-3/4 inch trunion bar assembly and reinforced body construction as our full-height models. The low profile design is frequently specified by property managers, hotel facilities, and retail centers where waste enclosures have strict dimensional constraints.

1 Yard1.5 Yard2 Yard3 Yard+1 more

View Details

Rear Load

Rear Load Container - Standard

The standard rear load container is our most versatile rear-loading dumpster, available in a wide range of sizes from 1 to 6 cubic yards to accommodate everything from small restaurant accounts to large multi-family residential complexes. The standard profile sidewall height strikes the optimal balance between holding capacity and ease of use for manual waste loading. Built from 12 gauge formed steel with continuously welded seams, the standard rear load features our proven 1-3/4 inch trunion bar assembly and is compatible with all major rear-load collection vehicles. This is the everyday container that thousands of waste haulers rely on for dependable, day-in, day-out service.

1 Yard1.5 Yard2 Yard3 Yard+2 more

View Details

Rear Load

Rear Load Container - Mini

The mini rear load container is purpose-built for locations that generate limited waste volumes but still require mechanized collection rather than manual cart service. Available in half-yard and one-yard capacities, the mini is the ideal solution for small restaurants, medical offices, boutique retail, and residential enclosures where a full-size dumpster would be oversized and impractical. Available with either an A-frame lifting assembly or pipe-style trunion bar depending on truck compatibility requirements, the mini container provides the same automated collection convenience as its larger counterparts in a compact, space-efficient package.

1/2 Yard3/4 Yard1 Yard

View Details

Need a Custom Configuration?

Every product can be customized to your exact specifications. Contact us for a quote.

Request a Quote