Watertight
Watertight Container
The watertight container is for loads that cannot leak: liquid-bearing waste, contaminated soil, and hazardous material. The floor is a 2-piece overlap with at least 3 inches of overlap, continuously welded on both the interior and exterior faces, and every panel joint has a P-gasket compression seal. The full-height rear doors close on a compression gasket, and the drain valve has a positive shutoff for controlled discharge. Every container is hydrostatically tested before it ships. A 30-yard holds roughly 170 trash bags of volume with a weight capacity of 6 to 7 tons. Environmental remediation, contaminated soil removal, and industrial liquid waste are the main uses. Sizes run from 15 to 40 cubic yards, cable roll-off compatible.
Key Features
- 2-piece overlap flooring with 3-inch minimum overlap
- Continuously welded interior and exterior floor seams
- P-gasket compression seal at all panel joints
- Redundant seal system at every potential leak point
- Hydrostatically tested before every shipment
- Built for hazmat and liquid waste that cannot leak
- Full-height rear doors with compression gasket seal
- Drain valve with positive shutoff for controlled discharge
- Cable roll-off compatible
- ANSI Z245.30 compliant, DOT where applicable
Available Sizes
Specifications
Floor System2-piece overlap, 3" minimum
Floor WeldsContinuous, interior and exterior
Joint SealP-gasket compression
TestingHydrostatic integrity test before shipment
Rear DoorsCompression gasket sealed
DrainPositive shutoff valve
TransportCable roll-off compatible
ComplianceANSI Z245.30, DOT where applicable
